Cross Shaft Power Press

We provide Cross Shaft Power Press with lot more traits. Such power press lessens noise and vibrations and contains minimal frame gapping with low angular deflection. The machine boasts of high rigidity frame and bolster and contains high precision forming for longer die life. This Cross Shaft Power Press is hi-torque pneumatically operated and takes in single disc combined clutch & brake unit. Its gear transmission runs in oil bath and comprises wide slide and bolster area.

Slide Counter Balance : Pneumatic counter balancers are provided to counter the weight of the slide and toolings, which help in taking up the bearing clearances and ease side adjustment, as well as smooth movement of the slide and effective braking.

Pneumatic Clutch- Brake : The single-disc clutch has the advantages like; a continuous joint-free stroke, no adjustment is needed to correct wear on the facings, it is self-ventilating which increases it performance, its operation is safe and fast, etc.

Request a Quote

Frame : It is composed by thick steel sheets cut by sinking welded and stress-relived before machining, so as to eliminate any residual tensions. The dimensions study is carried out according to methods of calculations in order to assure the maximum strength against any deformation even under the highest rated load.

Drive : Fully enclosed, well-designed, single-geared, with main shafts supported at three bearing points located close to each other impart sturdiness and eliminate cantilever action. Precision cut, fully enclosed gears running in oil bath with fly wheel and back shaft running in anti friction bearings provide silent and vibration-free operation.

Non geared also available upto 100T

Eccentric Shaft : It is obtained from a forged piece of carbon steel. Prior to the machining, the shaft undergoes an ultra-sound inspection and a chemical and metallographic test, Shaft is ground finished on Bearing surfaces, all main Bearings are of Heavy Walled Nickel phosphorous Bronze, which are hand scrapped.

Electrical Controls : A lockable selector switch of ONCE, INCH and CONTINUOUS mode of operation is provided. The press is equipped with a highly reliable Dual Solenoid Valve, which prevents faulty operation by electrical lockout. ‘Top Stop’ to stop the press at Top Dead Centre. Two Hand Engagement Device, Emergency Stop’ are some of the other standard features. The electric equipment is in line with the latest safety.

Quality

  • Reduce noise and vibrations.
  • Minimal frame gapping, low angular deflection.
  • High rigidity frame and bolster.
  • High precision forming for longer die life.
  • Hi-torque pneumatically operated
  • Single disc combined clucth & brake unit
  • Gear transmission runs in oil bath.
  • Gear transmission runs in oil bath.

Specifications

Model – LM 25 32 40 63 100 160 200 250 315 400
A B A B A B A B A B A A A A A
Force KN 250 320 400 630 1000 1600 2000 2500 3150 4000
Rated distance before B.D.C. MM 3.5 2.2 3.5 2.2 4 2.2 5 2.5 5 2.5 6.3 6.3 6.3 8 12
Number of slide strokes SPM 70 140 70 140 65 130 60 120 45 100 40 40 35 35
Fly Wheel energy KJ 4.4 3.0 4.4 3.0 8.0 4.6 16.75 7.8 25.0 12.5 55.0 70.0 80.0 120.0 240.0
Stroke fxed MM 80 80 88 100 125 160 200 200 200 250
Variable stroke (Optional) MM 8 -80 8-80 8-88 8-100 8-125 8-160 20-160 20-160 20-160 –
Shut height (Stroke down , Adj. up)
 MM 300 300 315 350 450 500 560 560 630 700
Slide adjustment MM 63 63 70 70 80 125 125 125 125 125
Bolster area (L-RxF-B) MM 630 X400 630 X 400 800 X 450 900 x 550 1000×630 1120×750 1250×800 1250×800 1450×900 1450×900
Clear distance between uprights MM 420 420 500 590 670 775 900 …
Main motor KW x RPM 2.2×1500 2.2×1000 2.2×1500 2.2×1000 3.7×1500 3.7×1000 5.5×1500 5.5×1000 7.5×1500 7.5×1000 15×1500 15×1500 18.5×1500 22×1500 30×1500
Slide adjustment motor KW x RPM 1.1×1500 1.1×1500 1.5×1000 1.5×1000 2.2×1000
Height from floor to Top of bolster
 MM 800 800 900 900 900 900 900 900 900 900
Required air pressure ATM   5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
Die cushion model   DC -72 DC -72 DDC – 82 DDC -102 DDC – 123 3DC – 144 3DC-144 3DC-164 DC – 002 – 30-125
DIE CUSHION force KN 17 17 44 70 100 200 200 270 300
stroke length MM 50 50 50 50 50 .75 100 100 100
pressure pad area MM 290 x 200 290 x 200 335 X 230 380 x 260 475 X 330 535×425 600×425 600×475 850 x 520
required air pressure ATM 7 7 7 7 7 7 7 7 5